Specifications :Power Source :Electric; Rotate speed :0-35,000RPM; Input Voltage :110V/220V,50-60HZ

Output: DC0-32V,0.5A;Power: 65W;Handpiece Stong :102L

Collect :2.35mm By default (if you need other 3.0 or 3.175mm collets, please contact customer service.)

Max Torque :2.8N.cm;Fuse: 2A

Micro motor Type :Carbon Brush

Maintenance requirements:

1. The handle must not be idling, and the bur must be installed.

2. When the handle is in use, no water can enter, and the bearing will rust.

3. It is strictly forbidden to touch and drop, especially the handle

4. It is strictly forbidden to refuel the bearings

5. The handle cannot enter the dust, if the dust enters, it needs to be cleaned in time